felts

英

美

网络  毛毡; 毡合

双语例句

• And the test system was used to test the heat exchanger which adopts porous copper fiber sintered felts which were different type or having different structure, or different types of heat transfer plate.
  利用测试系统，测试了采用不同类型和不同结构参数的多孔铜纤维烧结毡、不同分布腔结构换热腔板的换热器的性能。
• Fiber/ sulfonated SBS composite membranes were made by way of integrating S-SBS with the glass fiber felts, just in connection with the problems of the brittleness and poor strength of S-SBS membranes.
  针对S-SBS膜强度较低和干膜较脆的问题，通过复合玻璃纤维毡制备了纤维复合磺化SBS膜。
• Ordinary alumina-silicate refractory fiber felts
  GB/T3003-1982普通硅酸铝耐火纤维毡
• In some papers, the felt finish is made by impressing still-wet paper with variously structured felts.
  有些纸，表面的毛布纹是用不同纹理的毛布压向仍然是湿的纸上而成。
• The adsorption properties, wetting ability and electrochemical impedance spectrum properties of graphite felts in vanadium electrolyte were investigated. The results show that adsorption property and wet-ting ability were increased with increasing the extent of oxidation.
  研究了不同氧化程度下的石墨毡在钒溶液中的吸附性、润湿性及其交流阻抗图谱（EIS），结果发现随着氧化程度增加，吸附性和润湿性增强；
• Anatase TiO 2 particles were prepared on viscose-based activated carbon fiber ( ACF) felts surface via sol-gel method with tetra-n-butyl titanate as precursor and characterized by XRD and SEM.
  采用钛酸四正丁酯为原料，用溶胶-凝胶法在粘胶基活性炭纤维（ACF）毡表面制备了锐钛矿型的二氧化钛粒子，并用XRD，SEM进行了表征。
• This article describes the revising process of Industry Standard "Fibreglass Needled Felts for Filtration" and the main contents of the standard draft reported for approval.
  前言：本文描述了《过滤用玻璃纤维针刺毡》行业标准的修订过程和标准报批稿的主要内容。
• Objective To observe the differences of histological compatibility among the polyester felts which were embedded in muscle, fat and tissue under the skin.
  目的观察涤纶毡片植入肌肉、脂肪、皮下组织后的组织相容性差异。
• The research is focused on upstream and downstream film holes. Effects of Porosity on Gas Permeability and Maximum Pore Size of Fiber Felts
  取气膜孔前后3倍气膜孔径范围为研究对象。孔隙度对纤维毡透气性能和最大孔径的影响
• C/ C composites with higher interfacial strength can be obtained by using needle-punched felts from oxidized PAN fiber.
  采用PANOF作为纤维材料制毡，可以得到界面强度较高的炭／炭复合材料。