就爱字典>英语词典>lubricated翻译和用法

lubricated

英 [ˈluːbrɪkeɪtɪd]

美 [ˈluːbrɪkeɪtɪd]

v.  给…上润滑油; 上油于
lubricate的过去分词和过去式

过去分词:lubricated 

BNC.42898 / COCA.36513

柯林斯词典

  • VERB 润滑;加润滑油于
    If youlubricatesomething such as a part of a machine, you put a substance such as oil on it so that it moves smoothly.
    1. Mineral oils are used to lubricate machinery.
      矿物油被用来润滑机器。
    2. ...lubricating oil.
      润滑油
  • VERB 促进;使顺畅
    If you say that somethinglubricatesa particular situation, you mean that it helps things to happen without any problems.
    1. Franklin's task was to lubricate the discussions with the French.
      富兰克林的任务是促使与法国方面的会谈顺畅进行。

英英释义

adj

  • smeared with oil or grease to reduce friction
      Synonym:greased

    双语例句

    • The bearing should be fully lubricated while operating.MoS2 is used for lubrication.
      振动器在使用过程中,应充分保证轴承有良好的润滑条件。
    • Even though bearings are usually lubricated, there is friction and some wear.
      即使经常给轴承润滑,还存在摩擦与一些磨损。
    • Lubricated air compressor coupling, visual inspection of dry-type coupling.
      润滑空压机联轴器,目视检查干式联轴器。
    • Frictional Performance and Leakage of Ball Bearings Lubricated by Chlorphenyl Silicone oil in Vacuum
      氯苯基硅油润滑球轴承在真空环境下摩擦性能与泄漏量研究
    • Ensure that all manual and geared valves within the sub-system are lubricated correctly and operable.
      确保子系统内的所有手动阀和齿轮传动阀适当润滑和可操作。
    • The effects of Si content on wear properties of Si-modified high aluminum Zn-based composites were investigated by abrasion test under dry friction and oily lubricated friction conditions.
      采用磨损试验研究了干磨擦和油润滑摩擦条件下,硅含量对含硅高铝锌基复合材料磨损性能的影响。
    • The rig tongs must be kept clean at all times and kept well lubricated.
      任何时候钻具大钳都应该保持干净和良好的保养。
    • One mode is slippage along the discontinuity provided by the lubricated fault plane.
      其中一种方式是沿着润滑的断层面所形成的间断面而发生滑动。
    • The cupping value of lubricated aluminum alloy sheet is studied by BCS-30D general sheet metal test machine.
      在BCS-30D通用板材成形性试验机上,对铝合金薄板的杯突值进行了不同润滑条件的试验研究。
    • Mount the workpiece onto a lubricated mandrel of the proper size by using an arbor press.
      通过利用杠杆式冲床将工件锚定在适当尺寸的润滑心轴上。