slenderness
英 [ˈslɛndənəs]
美 [ˈslɛndərnəs]
网络 细长度; 长细比; 纤细; 名词; 细长
BNC.40473 / COCA.40756
英英释义
noun
- the property of an attractively thin person
- relatively small dimension through an object as opposed to its length or width
- the tenuity of a hair
- the thinness of a rope
- the quality of being slight or inadequate
- he knew the slenderness of my wallet
- the slenderness of the chances that anything would be done
- the slenderness of the evidence
双语例句
- Combined with the proportion of length to width of tongue, the automatic quantitative analysis of plumpness and slenderness of tongues is realized.
该文研究了曲线拟合参数与曲线形状胖瘦的关系,结合舌体的长宽比,实现了舌体胖瘦的自动定量分析。 - Impact of diameter-thickness ratio of steel tube and slenderness ratio of pier on extension, bearing capacity and energy absorbing of steel pier is studied as well.
目的研究钢管径厚比和桥墩柱长细比参数对外置钢管补强圆形钢桥墩承载力、延性和吸收能量的影响。 - Laws of bearing capacity and mechanical property affected by slenderness ratio and load eccentricity ratio were investigated.
根据试验结果,总结了长细比、偏心率对试件承载力和力学性能的影响规律。 - Bearing behavior of cast-in-place piles with similar slenderness ratios in deep soil layer
深厚土层中长径比相近灌注桩承载性状 - According to the relationship between the structural strength and slenderness of plate elements, the limited width-to-thickness ratio of the flange of a box-section column under seismic load is derived.
由构件承载力与壁板宽厚比的关系,得出了抗震设计箱形截面柱翼缘板宽厚比限值。 - The displacement ductility of the CFSSTC specimens were analyzed, the effects of the steel ratio, the slenderness ratio, and the axial compression ratio on the ductility of the CFSSTCs were studied.
同时研究了含钢率、长细比和轴压比对方钢管混凝土柱延性的影响。 - THE INTEGRAL MANUFACTURE TECHNICAL STUDY OF LARGE LENGTH-DIAMETER RATIO COMPOSITES LONG-TAIL NOZZLE Value Selection of Slenderness Ratio and Diameter-Thickness Ratio of Steel Tube for 1000 kV Transmission Steel Tubular Tower Legs
大长径比复合尾管整体成型工艺研究特高压钢管塔主材长细比及径厚比的取值 - Volumetric efficiency, slenderness, span over length ratio increase with the cone angle.
体积率、细长比和展长比都随着基本流场圆锥角的增大而增大。 - This article presents a unified analysis of the limiting slenderness of plate elements of compression members with three commonly used sections.
本文统一分析了轴心压杆三种常用截面的板件宽厚比限值。 - But while a new study has confirmed that French women are indeed the slimmest in western Europe, their slenderness, it has found, comes at a cost: they also worry the most about their weight.
研究发现,法国女性虽然确实在欧洲最为苗条,但这也不是白来的,她们对于自己体重的关注也是欧洲之冠。
