slivers

英 [ˈslɪvəz]

美 [ˈslɪvərz]

n.  (切下或碎裂的)小块，薄片
sliver的第三人称单数和复数

柯林斯词典

• N-COUNT 小片;一点儿
  Asliver ofsomething is a small thin piece or amount of it.
  1. Not a sliver of glass remains where the windows were...
     窗户上连一点儿玻璃碎片都没有留下。
  2. There was only one sliver of light in the darkness.
     黑暗中只有一点零星的光亮。

双语例句

• Surgery electricity slivers the power is100%, has not presented the serious complication.
  手术一次电切成功率为100%，未出现严重的并发症。
• Remove all slivers and burrs left cutting the tube, by reaming and filing, both inside and outside.
  通过内外铰锉，将遗留在管道切割口的长条和毛刺清除掉。
• It was found that fibers of circular cross section produce greater cohesion in webs and slivers than do trilobal fibers.
  圆形横截面纤维在棉网和棉条中，比三叶形横截面纤维能产生较大的粘着作用。
• Conversion of caster from the curved to the vertical bending one is the most effective measures to eliminate the pipe listers and slivers for cold rolled Ti SULCAK ( Ti-beating extra low carbon steel sheet).
  为了消除TiSULCAK（含Ti超低碳铝脱氧镇静钢）钢冷轧薄板上的铅笔型气泡，将铸机从弧型改为立弯型是最有效的措施；
• Broken splinters and slivers of ice, sparkling in the sun, covered him like flowers scattered in a grave.
  他身上覆盖的碎冰片在阳光下闪着光，仿佛撒落在坟墓中的花朵。
• The fruit slivers were placed on a bed of romaine lettuce, topped with croutons and drizzled with walnut oil.
  水果切片被放置在长叶莴苣的底床上，顶端放上面包丁，淋上核桃油。
• The quality of the drafted slivers performance is the primary indicator which is used to evaluate the effects of the drafting. Therefore, the study on drafting is aimed to obtain better yarn qualities.
  牵伸后的纱条质量是评定牵伸效果的主要指标，因此对于牵伸的研究是以获得好的成纱质量为目的的。
• This done, they immersed the slivers in an electrolyte containing sodium ions and put the resulting battery through 400 cycles of discharging and recharging.
  完成这些后，研究人员把木条浸在一种含有钠离子的电解液里，对这种特殊的电池进行了四百次的循环充放电。
• The study on the drafting force is the key issue in the research of drafting theory. The drafting force and its CV not only reflect the process of drafting, but also indirectly indicate the quality of the output slivers.
  牵伸力是牵伸理论研究中的关键问题，牵伸力及其不匀不但能反映牵伸过程的顺利程度，也能间接反映输出纱条的成纱质量。
• The motion of floating fibers during drafting has been considerably studied with the aim to control the floating fibers effectively, and to improve the slivers regularity.
  有效地控制须条在牵伸区内浮游纤维的运动，使其变速点分布更为合理，尽可能降低条干不匀率，是牵伸理论研究的基本问题。