shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- At a fixed carbonization temperature, the shrinkages of tangential and radial directions were higher than that of axial direction.
在相同炭化温度下，竹材炭化过程中切向和径向的收缩率高于轴向。 - The strength of popular cement at 3d and 28d be equivalent to high C3S cement only when it had high specific surface area, but its drying shrinkages was more than that of high C3S cement at the same curing and drying condition.
普通水泥只有在很高的比表面积时，3d和28d强度才和高C3S水泥相当，但其干缩比高C3S水泥大得多。 - The influences of initial temperatures and the sizes of clusters on the coalescence were revealed by calculating the shrinkages and aspect ratios and by tracking the snapshots of the system configures.
通过对并合体系的收缩因子、纵横比率计算，以及体系构型的跟踪记录，揭示了团簇的初始温度和团簇的尺寸对并合过程影响的一般规律。 - During the solidification of ductile iron, the volume change can be separated into several stages: after molten iron poured, shrinkages occur along with the temperature descent;
球墨铸铁凝固过程中的体积变化可以分成如下几个阶段：浇注后，铁水随温度的下降，发生液态收缩； - Testing method for drying and firing shrinkages of ceramic whiteware clays
陶瓷用粘土干燥收缩率和烧成收缩率测定方法 - The effects of carbonization temperature and time on shrinkages of PAN-CHF and PAN-ACHF, activation yield, specific surface area and adsorption capacity were investigated.
考察了炭化温度和炭化时间对PAN-CHF的收缩率、PAN-ACHF的收缩率、活化收率、比表面积和吸附性能的影响。 - The result shows that there are no casting defects, such as shrinkages, blowholes, and slag inclusions and the quality of casting is steady.
生产结果表明，铸件没有气孔、夹砂、夹渣、收缩等铸造缺陷，铸件品质稳定。 - The shrinkages of green bodies in X, Y, Z directions were measured. The results show that under the same pressure, there is no difference of shrinkage in X and Y directions, and does not change with the height.
结果表明，同一压力下，坯体X向和Y向收缩率一致，并且不同高度处的X、Y向收缩率无明显差异。 - If semi-rigid base course material shrinkages trains by the function of temperature contraction or aridity resistance exceed the ultimate tensile strain that the material what itself can bear, it will fracture, and influence the serviceability of the pavement.
但半刚性基层材料在温度作用或失水作用下产生的收缩应变一旦超过材料自身所能承受的极限拉应变，就会发生开裂，影响路面的使用性能。 - On the basis of temperature field numeric emulating and combining with dynamic dividing technology of melting pool isolated region, this article used G/ r~ ( 1/ 2) method to predict possible shrinkages and dispersed shrinkages that may appear in solidification process.
在一般铸件温度场数值模拟的基础上，采用G/R~（1/2）法并结合熔池孤立域的动态划分技术对凝固过程中可能出现的缩松缩孔进行了数值模拟；